Improved the BootCheck task execution method and increased the operation stability and the process speed.
* As a result of this change, this product does not support Windows 10 Home Edition.
* BootCheck supports Windows 10 only when using Hyper-V configured on local host. BootCheck does not suport Windows 10 when using Hyper-V configured on remote host.
When booting a backup image as a virtual machine, dynamic memory is used.
Improved the process time for booting up a compressed backup image as a virtual machine.

Patch Version 20.10.6.1

Replication feature is partly enhanced.
Accessing from Amazon EC2 to AmazonS3 via endpoints is supported.
Proxy Setting is provided to configure for Replication.
Creating a new folder under a bucket for Amazon S3 failed. Fixed this issue.
patch.ini is included in Support Information.

Version 4.0.8.1226

System restart is no more required upon completion of uninstallation process.
* System restart is required upon completion of upgrading the program from 4.0.7 or earlier version.
Implemented Auto Apply of the patch program in background.
The connection to Amazon S3 public endpoint specified with [Specified Provider] failed. Fixed this issue.

Version 4.0.7.1158

The backup images in version [210] are supported.
Replication of large volume of data to Amazon S3 failed in error. Fixed this issue.
BootCheck task running on remote hypervisor in specific environment failed. Fixed this issue.
BootCheck failed after timeout action in specific environment. Fixed this issue.
(11006) The count for the task results was not correctly reported in Summary mail. Fixed this issue.

Version 4.0.6.1119

The performance of the Replication feature is enhanced.
In the event that a replication task failed, the task was retried from the beginning. Fixed this issue.
BootCheck succeeded for a VM booted in recovery mode. Fixed this issue.

Version 4.0.5.1062

In some system environments, BootCheck process time was longer. Fixed this issue.
Replication of 15GB or larger backup image file to Azure failed. Fixed this issue.
(10975) When selecting Amazon S3 as the replication target and enabling [Keep target items same with source] option, the files deleted at the replication source are not deleted from the replication target. Fixed this issue.

Version 4.0.4.1015

When cocurrently executing BootCheck tasks for multiple environments, connection to iSCSI target failed to establish. This problem was fixed.

Version 4.0.3.978

Partly enhanced GUI.
Added folders for the layout of image list.
The following protocols are supported for the replication target.
Local folder
Network shared folder
SFTP
FTP
WebDAV-https
WebDAV-http
Amazon S3
Azure
OneDrive
Dropbox
Google Drive
The Replication policy is enhanced for the Replication feature. The following replication policies are provided.
All of the target image files
The latest generation only
Incremental image files only
Incremental files of the latest generation only
Base image files only
Base image files of the latest generation only
Keep items in replication target same with source
Resolved: A retry process looped after a task failed in error.
After a replication task failed due to network error, the subsequently executed replication task failed in "Failed to copy to image name. Level=ERROR [2]". This issue has been resolved.
(10479) In the event that a backup image file was deleted according to ActiveImage Protector's Retention Policy, the source file was lost with Code：-401. This issue has been resolved.
(9715) Replication retry attempts are enabled for local storage and network shared folder.
(8943) Slow transfer speed to SFTP was improved.

Version 4.0.2.933

Enhancements to BootCheck.
Downloading the update file over a network failed. This issue has been resolved.

Version 4.0.1.920

Changes to BootCheck.
When configuring the settings to create a BootCheck profile, the boot disk can now be specified.
While running BootCheck, only the boot disk is mounted.
(10461) The history of the BootCheck task did not display correctly. This issue has been resolved.
(10456) The BootCheck task summary was not sent via E-Mail. This issue has been resolved.

Version 4.0.0.908

Image file version [209] is supported.
Backup images created by using the HyperAgent feature in ActiveImage Protector Windows Edition are supported.
BootCheck has been enhanced.
GUI is partly changed.
The layout of the top bar in console window and the image list are now changed.
(10342) Concurrently recorded Replication logs were not output by task.
(10210) When configuring AmazonS3 endpoint setting, any URL including "http" was not accepted. This issue is resolved.
(9768) The number of incremental backup image files exceeding 10,000 were not correctly recognized. This issue is resolved.

Version 3.0.7.831

End Point URL for NIFCLOUD is changed to Object Storage End Point (nifcloud.com).
Memory size required to run BootCheck has changed.
(9880) Fixed:Refreshing Task Log in Dashboard was disabled in specific environments.

Version 3.0.6.828

Updated Amazon S3 region.
(9873) Fixed: When the settings for a replication task is were edited, connection test failed with Code：-115.

Version 3.0.5.821

Respective task logs and notification logs are created in the sub-folder under Task Log folder.
Enhanced AWS command line interface (CLI).
(9648) Fixed: Replication task was stopped by a locked image file in use.
(9595) Fixed: Backup chain was not found.
(9265) Fixed: Replication tasks were duplicated in some specific system environments.
(8997) Fixed: Changing file extension failed with the Replication task configured to an FTP replication target.
(8937) Fixed: Authentication for NTFS access to a managed folder was disabled in specific system environments.
(8954) Fixed: Duplicated execution of Replication tasks configured with an SFTP replication target failed with Code: -588 error.
(8551) Fixed: Execution of Replication task with "Explicit FTP over a TLS" encryption failed in connection test with Code: -115.

Version 3.0.4.803

Azure, is now a replication target.
ImageBootTest is renamed to be configured as a single task.
French is added to supported languages.
GUI improvement.
Changed the console display size.
[Edit Task] is added to the context menu displayed by right-clicking an image file added to the image list.
(9713) Some options for Consolidation tasks are improved.
(9005) Fixed: BootCheck's non-conversion character was recorded in the Windows Event Log.
(8299) Fixed: Some valid tasks were indicated as invalid.

Updates in Update patch (684)

Released as ImageCenter LE 3.0.3 Update Patch. Before applying this patch program, please be aware of the following:
In the event that you apply this patch program while the console is open, the console will be automatically closed.
Even after this patch program is applied, the product version, console version and agent version remain unchanged.
Replication enhancement.
API for copying from local storage to network shared folder dynamically switches depending on the system memory size.

Version 3.0.3.443

Fixed: When the [Guarantee run Consolidation task first] option was enabled, execution of some tasks combined with the ImageBootTest task failed.
Fixed: The temporary folder was not removed when upgraded.
(8924) Fixed: Cancellation of Replication task failed.
(8918) Fixed:The service (ICService) crashed when a specific system was rebooted and operated.
(8860) Fixed: When profiles at local storage were deleted, an invalid dialog was displayed.

Version 3.0.2.429

After installation of the product, a lengthy reboot time of the system occurred. This issue has been resolved.
A sort feature is provided for the items in Image List and Task Log.
ImageBootTest events are recorded in the Windows Log.
GUI improvements.
Position of the Replication Task was relocated in the Dashboard.
Task Log tab (Unmanaged, External Management) in Dashboard was hidden.
(8890) After updating the product, the information displayed in Daily Task Summary was different from before updating. This issue has been resolved.
(8886) ImageBootTest Execution Date/Time and Log Date/Time differed from each other. This issue has been resolved.

Version 3.0.1.407

When a folder is selected in Managed Group on Folder View, task log of the entire image files in the folder can be displayed.
When configuring the schedule settings to immediately run Verify task, a [Verify new image files only] option is provided.
GUI improvement.
In [Agent Settings], Email Notification dialog is clearer.
(8812) After the column width of the image list is changed and the view is switched to another status group, the displayed column width is misaligned. This issue has been resolved.
(8566) Credentials to access a shared folder are saved by default.

Version 3.0.0.391

Settings for Verify task can now be configured.
Image files can be managed by folder.
Pause/Resume Replication task is enabled.
GUI improvements.
Console change is accompanied by additional functions for Verify task.
[Task] tab on Dashboard has been expanded to provide the information of three tasks.
[Image managing folder] is added to Agent setting.
Sort function is provided for image list view and task wizard.
Log Filter is prominent.
If a disk signature collision occurs between the hard disk configured on the host system performing an ImageBootTest and the disk in the image used to boot, the image can still be used.
Cancelling of an ImageBootTest can be done.
The combined use of this product with ImageBoot 3 is supported.
(8709) E-Mail notification is enhanced to include the task type in the message.
(8636) E-Mail notification for ImageBootTest now includes the test result in the subject.
(8624) Connection test with Amazon S3 did not work. This problem has been resolved.

Version 2.0.0.301

NEW!: ImageBootTest quickly ensures that a backup image can successfully boot as a virtual machine in a Microsoft Hyper-V environment.
A predefined number of consolidated image files can be retained.
Settings for a monthly schedule can be configured.
(8317) The following task execution results are changed from "Succeeded" to "Warning".
Execution of the task is skipped since the specified image is being used by another task.
Execution of the task is skipped since there is no new image file created at the scheduled time.

Version 1.0.8.255

(7901) FTPS is now a supported protocol type for the replication target.
FIX: (8010) When selecting Amazon S3 or WebDAV as the protocol type for the replication target, the processed size in the log indicated "0.00 GB". This issue has been resolved.
FIX: (8015) Check Duplication of profile names for Replication and Consolidation tasks did not work. This issue has been resolved.
FIX: (7906) The total size was not correctly displayed in the Current Task Tab. This issue has been resolved.

Version 1.0.7.247

FIX: When keeping console window open, the service (ICService) caused a memory leak. This issue has been resolved.
FIX: As Network Discovery does not complete, Explorer hangs when running an Image Search. This issue has been resolved.

Version 1.0.7.235

Windows 10 Anniversary Update is supported.
After updating/upgrading to the Windows 10 Anniversary Update, a re-install the product is required.
An option to exclude consolidated image files from the source files for the subsequent scheduled consolidation task has been added.
An Enhanced Update feature to select non-current update files has been added.
A proxy server can be specified for the update check.
An Enhanced Explorer feature has been added.
(7714) An arrow button has been added to navigate to the upper node in the [Select Image File] window.
(7712) Expand/Collapse of the agent view is enabled.
Enhanced GUI interface.
FIX: When Amazon S3 was selected for the destination target, the connection failed. This issue has been resolved.
FIX: (7083) Execution of "Purge all logs now" failed with "Template Error". This issue has been resolved.

Version 1.0.6.186

FIX: (7028) A scheduled replication task for replicating vmGuardian image files with the [Keep target items same with source] option did not work properly. This issue has been resolved.
FIX: (7012) When replicating a backup image that was split into chunks with an MD5 file created for that image and the option [Replicate only the last generation] enabled, those files were prevented from replicating completely. This issue has been resolved.
FIX: (5945) ICService.exe crashes with a port binding error. This issue has been resolved.
When backup image files are replicated, the replicated files retain the time stamp of the replication source files. (exception: When WebDAV/Amazon S3 is specified as the protocol type for the replication target)
The Deduplication Compression feature is disabled during consolidation.

Version 1.0.5.178

A specific image file in the Create Task window can now be selected directly.
Execution of a replication task can now synchronize the replication target with the replication source.
FIX: (5650) Network bandwidth usage priorities can be adjusted when running a replication task. (exception: When WebDAV/Amazon S3 is specified as the protocol type for the replication target)
Amazon S3-compatible storage is now supported as a replication target.
The Smart Consolidation option has been added when running a consolidation task.
Specifics of the Consolidation features have been enhanced for the displayed results of Consolidation tasks.
FIX: (6988) Replication task failed to replicate backup files to Amazon S3 target on Windows Server 2008 R2.
FIX: (6896) An issue with changes not being applied correctly to an event edited in a weekly schedule has been resolved.
FIX: (6879) The consolidation task failure with the termination code : -858993460 has been resolved..
FIX: (6616) The following error was output in Windows Event Log. This issue has been resolved.
　　　　　Event ID: 1000, Task Category:(100), Faulting application name : ICScheduler.exe

Version 1.0.4.151

FIX: Connecting to an incorrect Auto update server failed. This issue has been resolved.

Version 1.0.3.132

Enhanced GUI appearance.
With the [Only replicate the last generation] option enabled, the previous generation files are deleted simultaneously from the target while the latest generation files are being replicated to the target.

Version 1.0.2.123

Improved FTP feature.
Enhanced GUI appearance.
FIX: After making a replication change in [Edit Schedule] option, the replication task did not execute properly. This issue has been resolved.
FIX: If deleting a Replication task which the settings were edited for a Replication target, the settings of the previously configured target may be displayed when editing a target for a current profile. This issue has been resolved.
FIX: When selecting Amazon S3 as a Replication target and then the settings are edited for the target, the setting information is not correctly displayed. This issue has been resolved.
FIX: When FTP/SFTP/WebDAV/Amazon S3 is selected as a replication target and the settings for the target have been edited, a "1" is always indicated for the number of times to retry. This issue has been resolved.
FIX: After changing the time settings for the [Send Daily Task Summary Email to] option, the [Apply] button became disabled. This issue has been resolved.
FIX: With the [Purge all logs now] option enabled, the associated files were not purged. This issue has been resolved.
FIX: In the event of network failure, scheduled tasks did not start on [Immediate] execution after network failure occurred. This issue has been resolved.
FIX: If the folder name specified for the destination to save image files includes a double-byte character, scheduled tasks did not start on [Immediate] execution or [After each x new image files]. This issue has been resolved.

Version 1.0.1.91

FIX: "-401 Error" occurs when attempting an operation that requires the gathering of information from the connected agent. This issue has been resolved.
FIX: If the path of a stored image file cannot be accessed while performing a task, the task status is reported as completed successfully rather than reporting as failed. This issue has been resolved.

Version 1.0.0.83

First version release.

Back to Index