System Requirement

 

Revised on September 6, 2018

 

This document contains the system requirement regarding the use of this product. It is highly recommended that you read this document carefully before using this product.

 

Table of Contents

Hardware

Operating System

File System

Conditions for Use of Features

Others

Hardware

CPU

Pentium 4 or above

Main Memory

1024MB or more is required.

Hard Disk Space

1500MB or more of available hard disk space is required.

DVD-ROM Drive

Required to install the product (boot up the product) and boot up Boot Environment.

Internet Connection

Required for activation of the product and installation of the latest updates.

Storage Interface

Parallel ATA, Serial ATA (including eSATA), SCSI, SAS, iSCSI, SAN (Fibre Channel), USB, FireWire (IEEE 1394), network shared folders compatible with file sharing SMB/CIFS protocol (shared folders of Windows OS and Samba), virtual hard disk created in storage space

* P2V conversion from storage media of which sector size is 512 byte or more is supported.

Back to Table of Contents

Operating System

Server Edition, Desktop Edition

Windows XP SP3 (x86) / SP2 (x64), Windows Server 2003 SP2 (x86/x64) or later

(All editions except for Starter and Windows RT)

for Hyper-V Enterprise

Windows Server 2008 R2 or later server OS (including Hyper-V Server) on which Hyper-V is configured.

ReZoom it!

Windows Server 2008 R2 or later

IT Pro Edition

Windows XP SP3 (x86) / SP2 (x64), Windows Server 2003 SP2 (x86/x64) or later

(All editions except for Starter and Windows RT)

ActiveImage Protector IT Pro Edition Creator

Windows 7 (x64), Windows Server 2008 R2 or later

Cluster Edition

Windows Server 2003 SP2 (x86/x64) or later

File System

Hot Imaging

FAT16, FAT16X, FAT32, FAT32X, NTFS, CSVFS, ReFS

* The above listed file systems on MBR and GPT disks are supported.

* The above listed file systems on storage spaces configured on Windows 8 or later OS are supported.

* ReZooming a virtual machine created in ReFS is not allowed.

Cold Imaging in Boot Environment (Linux)

FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM

Cold Imaging in Boot Environment (Windows PE)

FAT16, FAT16X, FAT32, FAT32X, NTFS, ReFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap

* File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports the file system on Storage Space and ReFS.

* By using Windows ADK or Windows AIK, the boot environment may be created by using Windows PE-based boot environment builder.

Back to Table of Contents

Conditions for Use of Features

For more detailed information or the editions supporting the respective features, please refer to the Readme or the product's Help.

Inline Deduplication Compression

Virtualization (target platform for conversion to virtual machine)

* Conversion to the free license version of VMware vSphere Hypervisor (ESXi) is not supported.

* Conversion from 32-bit OS to ESXi 6.5 host is not supported.

* Please make sure that Microsoft .NET Framework 4 or later is configured on the conversion source host.

vStandby (target virtual platform)

* Conversion from 32-bit OS to ESXi 6.5 host is not supported.

* Please make sure that Microsoft .NET Framework 4 or later is configured on the conversion source host.

BootCheck (supported hypervisor)

* Please make sure that Microsoft .NET Framework 4.0 or later is configured on Windows Server 2008 R2.

Execution of the process requires 768 MB memory on hypervisor.

Windows PE-based Boot Environment Builder

* Windows ADK is required to provide the following components.

vStandby Boot Environment Builder

* Windows ADK is required to provide the following components.

Back to Table of Contents

Others

Back to Table of Contents

 

Back to Index