System Requirement

 

Revised on April 26, 2017

 

This document contains the system requirement regarding the use of this product. It is highly recommended that you read this document carefully before using this product.

 

Table of Contents

Hardware

Operating System

File System

Others

Hardware

CPU

Pentium 4 or above

Main Memory

1024MB or more is required.

Hard Disk Space

1024MB or more of available hard disk space is required at setup.

DVD-ROM Drive

Required to install the product (boot up the product) and boot up Boot Environment.

Internet Connection

Required for activation of the product and installation of the latest updates.

Storage Interface

Parallel ATA, Serial ATA (including eSATA), SCSI, SAS, iSCSI, SAN (Fibre Channel), USB, FireWire (IEEE 1394), network shared folders compatible with file sharing SMB/CIFS protocol (shared folders of Windows OS and Samba), virtual hard disk created in storage space

* P2V conversion from source hard disk of which sector size is 512 byte or more is not supported.

Back to Table of Contents

Operating System

Server Edition, Desktop Edition

Windows XP SP3 (x86) / SP2 (x64), Windows Server 2003 SP2 (x86/x64) or later

(All editions except for Starter and Windows RT)

for Hyper-V Enterprise

Windows Server 2008 R2 or later server OS (including Hyper-V Server) on which Hyper-V is configured .

ReZoom it!

Windows 7 (x64), Windows Server 2008 R2 or later

IT Pro Edition

Windows XP SP3 (x86) / SP2 (x64), Windows Server 2003 SP2 (x86/x64) or later

ActiveImage Protector IT Pro Edition Creator

Windows 7 (x64), Windows Server 2008 R2 or later

Cluster Edition

Windows Server 2003 SP2 (x86/x64) or later

 

Back to Table of Contents

File System

Hot Imaging

FAT16, FAT16X, FAT32, FAT32X, NTFS, CSVFS, ReFS

* The above listed file systems on MBR and GPT disks are supported.

* The above listed file systems on storage spaces configured on Windows 8 or later OS are supported.

* ReZoom feature does not support virtual machines created in ReFS.

Cold Imaging in Boot Environment (Linux)

FAT16, FAT16X, FAT32, FAT32X, NTFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap, Linux LVM

Cold Imaging in Boot Environment (Windows PE)

FAT16, FAT16X, FAT32, FAT32X, NTFS, ReFS, Linux Ext2, Linux Ext3, Linux Ext4, Linux Swap

* File system on Storage Space and ReFS are supported only if the boot environment is created by using Windows ADK that supports file system on Storage Space and ReFS.

* By using Windows ADK or Windows AIK, the boot environment may be created by AIPBE Builder.

Back to Table of Contents

Others

Back to Table of Contents

 

Back to Index